Probe for operating Turnout Motors - PECO
Description
PECO PECOLECTRICS
Probe for operating Turnout Motors
A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.
Recommended to be used with:
- PL-18 Studs and Washers
- PL-10 Turnout Motors
Details
Date Added | 2020-02-14 |
Product Id | 10491221 |
SKU | PL-17 |