Stud and Tag Washers for Turnout Motor operation - PECO
Description
PECO PECOLECTRICS
Stud and Tag Washers for Turnout Motor operation
A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.
Recommended to be used with:
- PL-17 Probe for Operating Turnout Motors
- PL-10 Turnout Motors
Details
Date Added | 2020-02-14 |
Product Id | 10491216 |
SKU | PL-18 |